K1Ti-As is a popular turning machine CNC system based on the technology of K1Ti. It can control 2 feeding axes, 2 simultaneously controlled axes. K1Ti-As can be matched with KND Stepper driver, which is equipped for general CNC Lathe.

 

Features

7 inch TFT color LCD with the resolution of 800×480.

 

The system has both the U-disk and RS232 interface, through which it is possible to exchange information between system and U-disk or computer. The system software can be updated with a U-disk.

 

The X-axis and Z-axis can be controlled simultaneously and the accuracy can reach up to 1μm. The max rapid traverse rate is 15 m/min, and the max feed rate is 12 m/min.

 

Various of machining operations are satisfied by 27 G codes and 26 M codes.

 

Support tool length compensation, tool nose radius compensation and backlash compensation.

 

With the function of linear and exponential acceleration/deceleration control and block pre-processing, high-speed and high-precision machining can be satisfied.

 

Taper thread, straight thread, and variable-pitch thread with both single-start and multi-start can be cut; The length, angle and speed for thread retreating can be specified.

 

Full self-diagnosis function and real-time display of internal/external state, alarm immediately when an exception is raised.

 

Display tool path by GRAPH function, full Chinese interface, complete help information, more conveniently to operate.

Specification

 

Item	Description		Specification
Controlled Axes	Number of axis controlled		2 axes (X, Z)
	Number of axis controlled simultaneously		2 axes
Command	Least Command Unit		0.001 mm
	Least Move Unit		0.001 mm
	Maximum Command Value		±9999.999 mm
Feed	Traverse (Maximum)		15000 mm/min
	Feed rate range	mm/min (Per-Minute Feed)	1~12000 mm/min
		mm/r(Encoder of 1024 pulse/r is required) (Per-Revolution Feed)	0.0001~500.0000mm/r
	Lead of Thread		0.0001~500.0000 mm
	Automatic Acceleration/Deceleration		Provided(linear, exponential)
	Feed Rate Override		0~150%
Manual	Manual Continuous Feed, Manual return To Reference Point, Step feed		One axis a time, ×1, ×10, ×100
	Manual pulse generator		Provided
Interpolation	Positioning, linear/circular interpolation		G00, G01, G02/G03
Test	Dry run, Single Block		Provided
Canned cycle	Inner/outer diameter cutting cycle		G90
	Thread cutting cycle		G92
	Canned Tapping Cycle		G93
	Facing cycle		G94
Multiple repetitive cycle	Outer Diameter Rough Turning Cycle		G71
	Rough Facing Cycle		G72
	Canned Turning Cycle		G73
	End Peck drilling Cycle		G74
	External/Internal Slotting Cycle		G75
	Multiple Thread Cutting Cycle		G76
	Enhanced Thread Cutting Cycle		G78
Coordinate system and Dwell	Dwell(sec)		G04
	Coordinate system setting		G50
	Auto coordinate system setting		Provided
Run mode	MDI, Auto, Jog, Step, Edit		Provided
Safety	Stored Stroke Check		Provided
	Stored Stroke Check Disabled/ Every Axis Disabled		Provided
	Emergency Stop		Provided
Program storage and edit	Program Storage Capacity, Stored Program Number		32kB, 63
	Program Edit		Insert, modify, delete, copy
	Program No. , Sequence No., Address, Word Search		Provided
	Decimal Point Programming, Optional Block Skip		Provided
	Flash Memory		Provided (six partitions)
Display	LCD		800×480, 7 inch color LCD
	Position, Program, Tool Compensation, Alarm, Test, Diagnosis, Parameter		Provided
	Graph, Work-piece Counts		Provided
M, S, T  function	I/O: 20/16 points		Input: (panel: 4 points, machine tool: 16 points)
	Miscellaneous Function		2-digit M code
	Spindle Function		2-digit S code (gears) or 4-digit S code (analog spindle)
	Analogue Spindle(S4 bit), Constant Surface speed Cutting		Provided (8-bit D/A output)
	Tool Function		T01~T08
	Tool Rest Signal Timing Scan Check function		Provided
Compensation function	Tool Compensation Memory		±6 bit, 8 groups
	Tool Compensation Count Mode Input		Provided
	Tool Compensation Measurement Mode Input		Provided
	Tool Tip (Nose) Radius Compensation (Tool Compensation C)		Provided
	Backlash Compensation		Provided
Switch	Program Switch, Parameter Switch		Provided
Communication	RS232 communication		Provided
	U Disk Communication		Provided
Other functions	Circular Radius R Setting		Provided
	Electronic Gear Ratio		Provided
	Back Tool Rest Selection		Provided
	Power Off Work-Piece Coordinate Recall		Provided
	Rotary Axis Setting		Provided
	Clock		Provided
	Tailstock function		Provided
	Auto lubricating function		Provided
	Power Off Work-Piece Coordinate Recall		Provided
	Suited driver for CNC system		KND step motor driver
	The Add-on Panel of CNC System for Lathes		Optional

 

Dimension

Accessories

The additional panel: